At all times and all centuries, people have tried to make the facade of their houses attractive and original, but recently the facade, in addition to a beautiful appearance, should have certain characteristics that are realized relative to the whole house.
The corrugated board is not only facing facade, but also roofing material. Prices for roofing corrugated board H 114 are profitable, and it is produced in a large number of shades. Buy roofing corrugated board here / can be at the price of the manufacturer.
Over the past decades, the ventilated facade has been especially popular. The main idea of performing this facade is, between the outer layer of the facade and the wall of the building, there is an air gap. For external sheathing, corrugated board is very well suitable due to its characteristics. But an additional element. which enhances the durability of corrugated board is a galvanized metal base of a special shape.
Now let’s talk about how to carry out a corrugation with a corrugated board.
A very important condition for the installation of corrugated board in that. that the air that will be in the air gap must constantly circulate. This is the protection of the inner wall from the appearance of mold and dampness, as well as the heat insulator and the sound insulator will also serve. The corrugated board can be used in two ways:
1) as facing material, in this case, corrugated board is simply installed on the surface;
2) as facing material, but already assembly wall module.
In the first version, the corrugations is installed in this order. A metal base is mounted on the wall and it is attached from the surface with dowels. It is advisable to install the frame using the level, in addition, the metal base can be replaced with a wooden one, while the tired space can be filled with warming material. The corrugated board can be installed in vertically, horizontally, and sometimes at an angle, but this is a topic for another article. To protect the insulation and, if you use, a wooden base from moisture, it is necessary to install a plastic film. The corrugated board is attached to the metal frame using self -tapping screws, to the wooden one using nails or construction stapler. If you use corrugated board on the outer wall, then you need to perform a hyizroizolation of the foundation. A sufficient level of waterproofing will be laid in two layers of roofing material. In addition to the moment of fixing the basis, to the foundation using anchors, the installation of corrugated board is no different.