Building a bath of wood is not such a difficult task. The layout of the dressing room and steam room is originally thought over, a linden linden car for a bath is purchased. Keep in mind that the floor in the dressing room should be higher so that water does not flow there. Of course, you need to think in advance how the water supply system, the heating system and water drainage will take place. In order not to think through these details later and not lose nothing, you can buy a ready -made bath project.
Before proceeding with the construction of the bath, you need to choose a place for its placement. If your site is small, you can attach the bath to the house.
The foundation for a bath of wood can be made lightweight, since the weight of the building will be small. Deciding on the technology of erecting a lightweight foundation, take into account the following factors: climatic zone, soil type. If your area is rocky soil, you should choose a monolithic concrete slab, and if sandy, any type of foundation is suitable.
Before starting the construction work, you need to prepare logs and decide where the windows and doors will be. Having set the log house on the foundation, it is necessary to give the design time for shrinkage. This can take from six months to a year, depending on the time of year. If you are building a bathhouse using frame technology, then you need much less time to shrink.
The construction of the roof should be carried out based on your preferences. It can be single -shielding or gable, can be with or without attic. If the roof is without an attic, you should think about its insulation.
As for the windows, they should be at an altitude of eighty-hundred centimeters from the floor. The windows first need to be put on the slats. In the place where the window will be located, it is necessary to make a groove for a rack. Then the window will be easy to rise and drop. Experts recommends leaving a place up to the log house – about 7 centimeters. After shrinkage of the log house, you can install a double -glazed window.
Doors installation is carried out according to the same principle. But the indent should be 3-4 centimeters.
Next, you need to lay out the stove. If you do not have the experience of laying a furnace in a bathhouse, it is better to entrust professionals. .
Next, you can proceed to the exterior decoration of the bath. It can be performed using a lining or block house. The lining is inexpensive, has a wide color palette, it will hide all the shortcomings of the log house. The block house implies the lack of deformations, low exposure to fungal lesions, ease and speed of installation.
Upon completion of construction and finishing work, you can begin to create an interior of your bathhouse. When decorating the interior, focus on your taste and preferences.
