The smooth white surface of the bath sooner or later loses its aesthetic appearance. Chips, scratches, indelible spots of rust, etc. appear on it.D. Of course, you can purchase another plumbing, but in our time it is quite expensive. In addition, the dismantling of old equipment and the installation of a new one is a rather troublesome thing. It is much easier to update the surface by simply painting it enamel.
Preparatory work
First, the bath must be washed with a solution designed to remove lime deposits. Further, the surface is wound up by any cleaning powder that does not contain chlorine. Then you can proceed to the removal of the old enamel. Do this with abrasive stone. The entire surface passes carefully. The dust formed at the end of the preparatory work is washed off. Further, the bath is filled with hot water and hold it for 3 minutes. After that, the surface should dry. It is not necessary to wipe it with a rag. Otherwise, villi can remain on the walls because of which high-quality enameling of baths may not work.
Application of enamel
For this type of work, a special type of two -component enamel is used. Before proceeding with processing, the base and hardener must be mixed as thoroughly as possible. Then the first primer layer is applied to the walls of the bath. When enameling, you can use a roller, or a brush with a strong pile. The primer layer should be quite thick. Be sure to wait for its complete drying. Then you can proceed to applying the primary finishing layer. It should be thin. Fifteen minutes after the entire surface is covered, they begin to perform a second finish stain. During the performance of this operation, it is necessary to carefully ensure that the walls and bubbles do not form on the walls and bottom. The bathroom can begin to be used after the enamel dries completely.
It is not necessary to purchase white dye for painting. Today, enamel and varnishes are produced, specially designed for this purpose of a variety of colors. Therefore, plumbing can be given by any appearance that is most suitable for the design of the room itself.
It is not difficult to paint the bathroom. The most important thing is to achieve a flat and smooth surface. The enamel applied in the described method will remain brilliant and attractive for a very long time.
Video on the topic:
