In order to perform the installation of electrical supply networks, you will need to perform a small layout of the wiring throughout the structure in order to know exactly where and where the wires will go, as well as purchase all the necessary materials, and after that it will be possible to start direct installation wiring. There are two options for conducting wiring: these are open and closed options. For example, with a hidden version, the wires will be quite reliably protected from various mechanical damage. Also, laying the wiring with this method will give the structure a more elegant and attractive appearance, without protruding wires and cables. However, in this case, access to wires will become less accessible due to their secrecy. Also, with this method, the method should be taken into account and the fact that low -current and power cables should be located separately, and be reliably protected from electromagnetic influences from power cables.
Well, if you are interested in high -rise work. Only there you can order specialists in high -rise work for a reasonable fee.
You can also combine these options for laying wires. . Because low -current networks are often changing, for example, it may be necessary to conduct an additional wire for TV, or lengthen the Internet cable. But it is necessary to decide on your own what exactly the option of laying wires to choose.
Regarding the choice of wires, then it should be careful so that the wiring is of high quality. With all this, if you are not sure of quality, you can perform electrical measurements that can show the weaknesses and strengths of the work performed. On the market you can buy different cables and wires, both copper and aluminum. You should know that not all wires can withstand different current forces. For example, a copper wire can withstand a higher load, and aluminum, smaller. When installing aluminum wires, a large amount of curvature, as well as their frequent bending in one place, should be avoided. So these wires can easily break. Despite the fact that copper wires are somewhat more expensive than aluminum analogues, it is worth choosing copper wires, you should also definitely think about grounding in sockets.
.
