On the doors you can decorate glass with different methods, but it is better stained glass. It gives the room brightness and uniqueness. To decorate the glass you need: stained glass paints, aluminum wire, aniline dyes and white glue. First you need to decide on the pattern of the stained glass, only so that it is not annoying, as it will decorate the house for a long time. Then you need to portray the drawing on the wood -size watman.
Dear readers of our site, if you want to purchase high -quality building materials for construction and repair work. Then we advise you to visit the best building materials store by passing the link. There you can order all the necessary building materials at a low price with delivery at any time. Namely, you can buy cement, cement in bags, cement wholesale, cement M500, white sequence, cheap cement.
After that, the location of the stained glass. Then the glass is pulled out of the door and is thoroughly washed. Fastened with tape a pattern with a pattern. The glass is placed horizontally.
The wire must be bent and placed along the contour of the sketch image. Then, the part of the wire that must be attached to the glass is densely and neatly smeared with the PVA emulsion. For better gluing wire from above on the glass you need to put a plywood with a pattern. And this circuit should completely stick in two hours.
To prepare paint you need dye and distilled water. The solution should not be very thick, but resemble cream. Next, you need to on a small section of glass, apply the mixture to check the resulting shade. If necessary, you can add dye, if the paint is pale.
The solution is applied to the glass with a brush. The color will be more intense if there will be a lot of paint applied. The other side of the glass is processed to dry out the stained glass.
