Often, the layout of the apartment does not allow you to perform a conceived modern design. Therefore, you have to perform such a procedure as the demolition of old partitions. This work is heavy and dusty. However, with your own hands are quite fulfilling.
Organizational issues
It should be remembered that the dismantling of the partitions and walls that are not even related to the supporters are prohibited by standards in certain cases. This issue should be dealt with in advance. If there are no restrictions, you can proceed to demolition. Previously, in all rooms, the apartments cover the floors and furniture with plastic film, since there will be a lot of dust during demolition. Noisy dismantling work can be carried out exclusively during working hours and after receiving the consent of the neighbors.
Preparatory work
First of all, you should moisten the surface of the partition with water on both sides in order to reduce the amount of dust. In the process of demolition, masonry should also sometimes be moistened. On the floor, you must definitely put a thick layer of fabric. Thus, it can be protected from falling bricks. Wall frame and reinforcement, if available, are cut around the perimeter. It is impossible to neglect the implementation of this stage. Otherwise, the partition will collapse into a large area than required. It is also necessary to pull out the dad, which the builders are clogged between the floor slab and the upper end of the wall.
Dismantling of partitions
The end of the bite is inserted between the blocks or bricks a little at an angle and the elements are knocked out by means of a hammer. Thus, a row behind a row is made in the wall of the necessary width. In the event that any of the bricks interferes with the execution of the smooth edge, it is not removed from the masonry, but simply break off part of the necessary length.
To dismantle a concrete partition, you will have to use a perforator. At the same time, you also need such a tool as a grinder. The fact is that in concrete there is always reinforcement, which will need to be cut in parts. On the wall should be drawn the line of the future opening, and then along its entire length, drill with a small step of the hole. It is possible to alleviate the demolition of concrete in the same way by dividing the area to be demolished into individual sectors using a punch.
Useful advice
Do not throw pieces of brick and concrete into garbage tanks. This can lead to a breakdown of the equipment of the UKH machine with the imposition of a penalty to the culprit. It is better to order the removal in advance or for extreme cases, fold the waste next to the garbage platform. The public utilities will be removed by the loader.
The special difficulty in the demolition of non -carrying walls do not differ. However, the event is quite complicated in relation to physical exertion. Perhaps, in some cases, it is worth spending some money on calling specialists.
Video on the topic:
