Using the parking lot as a floor covering, today is very popular among consumers. This is due to the fact that this type of decoration has a mass of advantages compared to other finishing materials. But the main positive property is the possibility of its restoration. We are talking about such a method as a parquet cyclist, which can be performed independently.
Preparatory work
Over time, the parquet loses its brightness and attractiveness, gaps, spots and other defects form on it. And to remove them, you need to completely remove the varnish and apply a fresh layer of varnish product.
During preparatory work, parquet is thoroughly cleaned of garbage and dust. All skirting boards are removed and cleaned in another room. After that, the upper lacquer is removed. Usually a special device called the cycle is used to remove it. This tool can be purchased in any construction department. Then the floors are abundantly moistened with water, after which the preparatory work is over.
To qualitatively carry out all the repair work with the coating, you must follow the following instructions:
Starting from the center of the room with the help of a sharpened cycle, the old varnish is removed. In this case, the direction of movement of the tool should be observed, which should go from the center to the walls. Be sure to ensure that the cycle cleans the surface along the location of the wood fibers;
During the removal of the varnish coating, you should periodically tighten the tool. This will remove the thinner layer of wood and extend the life of the entire coating;
Then all the garbage is removed from the floor surface and putty of various cracks and cracks on the floor;
After the plump surface dries, the surface is grinded. For this work, sandpaper of medium abrasiveness is used;
Before applying a new varnish to a wooden coating, you need to carefully remove all the garbage and dust from the floor. To do this, it is sweeping and washed several times;
. . The first layer is necessarily dried and polished again. .
Using this method to update the parquet coating, you extend its service and save money on repair.
