In the modern world there are such methods of tape foundations as filling and assembly. When assembling, the sole is erected from brick or reinforced concrete blocks, and when pouring a monolithic concrete, which is enhanced by the so -called Butet (reinforcing mesh). The place where the head of the head, furniture and all office equipment will be located should be the most durable. According to experts, the tape foundations with your own hands can be made in a short time. However, due to the presence in this design of many maritime seams, this basis is not used in complex and heaving soils.
Another problem is the creation of a stone ideal masonry. Build tape foundations of a prefabricated type of whole elements alone. It is strictly forbidden to use the battle inside.
As for the monolith, it – on the contrary, consists of only advantages. First of all, this arrangement of strip foundations of strip is actually suitable for any soil composition on the land. Secondly, there is not a single seam in the design. In turn, this helps to increase the life of the tape foundation. If the underground tapes and the blind area is insulated at the proper level, then they can serve at least 150 years. The foundations of the prefabricated are inferior in terms of operation of monoliths by about 3 times.
The most significant argument is the low price. I must say that you can buy materials, the price of which is relatively low, in any building materials store. On average, monoliths cost about 40 percent cheaper than prefabricated soles. By the speed of construction, they are slightly inferior to their “rivals”, but in general, confidently occupy a leading position and are considered the most reliable “soles”.
Let’s look in detail how to fill the strip foundations. The main documents that describe all how tape foundations should be arranged are drawings in which all parameters of future grounds for the correct distribution of all loads are laid. All mistakes in this regard are fraught with disasters for erected buildings, because it is very difficult to repair underground “soles”, and sometimes even unrealistic.
Only on the basis of the geological intelligence manufactured in the area, do the depth of the foundation of the strip. Experts will be able to determine the soil composition of groundwater and after that they will give answers on how to effectively protect the foundation of the foundation with seasonal “unrest”.
The scheme of tape foundations with reinforcement is selected taking into account all the total loads and parameters of linear. For these purposes, several mathematical formulas are used. To facilitate the task, all data can be entered in a special reader program that is available on each construction site. So very quickly you can determine the density of the reinforcing mesh and its diameter.