How to make a stretch ceiling design ourselves. The actual solution in the interior today is stretch ceilings. Even the most ugly, boring ceilings take the form of a real work of art when using such a repair.
Their attractiveness is explained by the ease and speed of installation. No complex constructive solutions are provided here. Fastening the baguettes to the walls, devices that fix the plastic film in the tension – the only requirement. When installing suspended ceilings, cleanliness and accuracy are guaranteed, you do not need to move furniture, cover the entire room with newspapers. And most importantly – the preparation of the ceiling is not required: do not put down, light up, align, etc. D. All defects will be closed with the canvas.
What is needed for mounting a stretch ceiling? Firstly – a sheet of plastic or, even easier – a film that has a certain shade or color. The film should be strong and opaque.
A matte stretch ceiling is an ordinary, impeccable and impeccably painted ceiling option.
When choosing a varnish version – the ceiling turns into a large mirror. Because of this, the space of the living room increases. Interesting is the option “under marble”. It is habitual to see it on the walls or on the floor, and not on the ceiling.
Secondly- a necessary condition for the ceiling installation,- baguette fastening, which are designed to uniformly fix the tension of the film. The mounting rails are tightly attached along the entire ceiling length, from one wall to another. Another rail is attached to the opposite side of the ceiling, which is designed to fix the opposite edge of the film.
It happens that the film is incorrectly stretched, with distortions, for example. This is corrected by weakening of the tension of the film. To do this, using the lock circuit breaker, the lever from the roller is removed and the film in the free motion goes back, while the circuit breaker again returns to the operator’s operating position.
Pull the film again, given the mistakes made. The fixer again holds the film in the correct tension. These actions are repeated until a uniform tension of the film is reached.
To exclude distortions during tension, you can apply a roller to which the edge of the film is attached. This design is very simple, fastening can be made independently. You will need to buy only a film of the required width.
There are also designs that cannot be made by modern technologies and used materials.
Stretch ceilings have many positive qualities. To the fact that they described above you can add their water resistance. No need to be afraid that the neighbors will flood your furniture. The film withstands a sufficient amount of water. Has excellent soundproofing properties, as well as inexplicability.
When disassembling a stretch ceiling, if there is a desire to replace it, you will not even need to remove the dirt. The whole structure does not occupy more than 5cm height.
You can skip the recording and leave a comment. Link placement is prohibited.
