A well -equipped floor should differ in strength, durability and wear resistance. But in order to make it just that, you will have to try very well. First you should check how even the base is. If you put the finish coating at once, it can be guaranteed that after a while the floor will begin to bend, and then create an unpleasant creak. In addition, the material will not last a long time.
To make the surface even, you can pour a cement screed or use a self -leveling mixture. The first option is cheaper, but in implementation it is much more complicated. But the self -leveling mixture is just enough to pour on the base and walk along it with a roller with spikes to remove air.
You can get high -quality thermal insulation of the floor, if before filling the screed, put the insulation on the floor slab. Only it should be thin enough. Cement screed will dry about 4 weeks. The screed of the self -leveling mixture will be ready for operation twice as fast.
The finish cover for the floor is selected on the basis of where exactly the repair is carried out. If the room is characterized by a high level of humidity, moisture -resistant materials should be used. Accordingly, it is possible to get a reliable floor in the room that is very intensely used, only if wear -resistant material is laid. Paul in the children’s room and in the bedroom is covered from the most natural material.
The floor must be well monitor after its arrangement is completed. For example, tiles should constantly be cleaned of moisture, like linoleum. If wood was used to create the finish coating, you should constantly paint. Otherwise, the repair will have to be carried out very often.
You can skip the recording and leave a comment. Link placement is prohibited.
