Nowadays, making repairs yourself has become very profitable. In some types of repair work there really is nothing complicated, and you should not spend money on workers.
Almost every owner in the house can put tiles on the floor. To do this, prepare: sieve, cement mortar, cement, 3%hydrochloric acid solution, gypsum solution, wet rag, and liquid cement milk.
We begin to prepare a cement mortar for facing tiles of floors (1 part of cement 6 parts of sand). The concrete surface of the floor of special preparation before facing does not require. Drink the surface with water, then wear a cement layer about 3 mm using a sieve. When the layer absorbs water, it will turn into a thick mass on which the tile itself will be laid. At the same time, apply nothing to the tiles. Pure cement, if necessary, can be replaced with a solution consisting of equal particles of sand and cement. If the layer of the screed is uneven, then it can be increased to 15 cm.
If the tile is placed in a small room, then at the corners you need to fix the light of the lighthouse with a gypsum solution (approximate slabs). At first one is laid, and after completely aligned the level, you can put the second. The remaining 2 tiles are adjusted in the same way.
After installing all four tiles, you can start laying the rest, focusing on the first. Tiles are insuced with a hand spatula to the required level, controlling the smoothness of the surface. After the flooring of the first row, the beacons can be removed by removing a gypsum solution from them, and put everything on the cement base.
The cement, squeezed out during the deck process, must be removed, and after 1-3 days, liquid milk from cement is prepared for 1-3 days, after which the floor is poured to completely fill the suture discrepancies between the tiles.
After 1-2 days, wipe the surface of the entire floor with a damp rag to remove excess cement. If the cement is difficult to lags behind, treat the surface with a solution of hydrochloric acid 3%, and wash with water after a couple of minutes. It will be possible to step to the surface of the floor after a week, in order to avoid the appearance of cracks and various deformations.