Painting the ceiling is its finish. To carry out these works, a painting roller is used. The foam rollers should not be used, since they are the most unreliable in use, especially already used. For quick and high -quality work, you should use a plastic bath for paint – this allows you to avoid a fence with a roller of excess paint and level it over the entire surface of the roller. In order for a paint of a different color to be poured into the bath without washing off the remnants of the paint, it must be lined with plastic film, the edges of which are attached around the perimeter to the sides of the bath with ordinary tape. After completion of the work, the film is removed and thrown away, the bath is ready for painting other surfaces.
There are a large assortment of water-dispersion colors in the construction markets today. You can verify in good quality of any paint only by testing the surface you prepared. There are many cheap, but high -quality brands of colors to cover the walls of rooms. For example, most water-dispersion acrylic paints are relatively inexpensive, but they have the best quality and well-deserved authority in the building materials market.
A pre-spaced ceiling is primed with water solution of water-dispersion paint. After applying such a primer, all the roughness and uneven surface of the ceiling are revealed. After that, it is necessary to grind the areas with defects, and then finally paint the ceiling with undamosed paint.
It should be noted that the consumption of paint on relief surfaces or pasted with a spider web increases by 20-30%. This is due to the porosity of some finishing materials.
You can buy loulios isolate at affordable prices on the site: LDSTYLE